Yamaha YZ85 2021 Owner'S Manual Download

Page: 24 / 82

Instrument an

control functions

4-6

EAU13414

Fuel tank

reather hose

Before operating the motorcycle:



Check the fuel tank breather hose
connection.



Check the fuel tank breather hose
for cracks or damage, and replace
it if necessary.



Make sure that the fuel tank
breather hose is not blocked, and
clean it if necessary.

EAU41281

Fuel cock

The fuel cock supplies fuel from the
tank to the carburetor while filtering it
also.
The fuel cock has two positions:

OFF

With the lever in this position, fuel will
not flow. Always return the lever to this
position when the engine is not run-
ning.

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

1. Fuel tank breather hose

1. Arrow mark positioned over “OFF”

1. Arrow mark positioned over “ON”

UB4B13E0.book Page 6 Wednesday, August 25, 2021 7:15 AM

Summary of Contents for YZ85 2021



















































































Search results

Summary of Contents for YZ85 2021

Reviews:

Related manuals for YZ85 2021

Brands by name

Popular brands

Yamaha YZ85 2021, Owner'S Manual

Search results

Summary of Contents for YZ85 2021

Reviews:

Related manuals for YZ85 2021

Brands by name

Popular brands