Perio
d
ic maintenance an
d
a
d
justment
7-28
7
EAU24361
Front wheel
EAU56372
To remove the front wheel
WARNING
EWA10822
To avoi
d
injury, securely support the
vehicle so there is no
d
an
g
er of it
fallin
g
over.
1. Loosen the axle nut.
2. Place the motorcycle on a suitable
stand. (See page 7-27.)
3. Remove the axle nut and washer.
4. Pull out the wheel axle.
5. Remove the wheel.
NOTICE:
Do
not apply the
b
rake after the
wheel an
d
b
rake
d
isc have
b
een
remove
d
, otherwise the
b
rake
pa
d
s will
b
e force
d
shut.
[ECA11073]
To install the front wheel
1. Make sure the brake pads have
not been forced shut.
2. Lift up the wheel between the fork
legs.
3. Insert the wheel axle from the right
side.
4. Install the washer and axle nut.
5. Tighten the axle nut to the speci-
fied torque.
1. Washer
2. Axle nut
1. Wheel axle
2
1
1
Ti
g
htenin
g
torque:
Axle nut:
70 N·m (7.0 kgf·m, 52 lb·ft)
UBR811E0.book Page 28 Thursday, March 21, 2019 10:27 AM
