Yamaha YZ250 2022, Owner'S Service Manual

Page: 183 / 274

KICKSTARTER
5-21
EAM30571
INSTALLING THE PRIMARY DRIVE GEAR
1. Install:
•
Thrust plate “1”
• Primary drive gear “2”
•
Governor drive gear “3”
• Washer “4”
•
Primary drive gear bolt “5”
TIP
• Install the plain washer with its chamfered side
“a” toward you.
• Apply the transmission oil on the bolt.
•
Temporarily tighten the bolt at this point.
2. Install:
• Primary driven gear
Refer to “CLUTCH” on page 5-25.
3. Tighten:
•
Primary drive gear bolt “1”
TIP
Place an aluminum plate “a” between the teeth
of the primary drive gear “2” and driven gear “3”.
EAM30572
INSTALLING THE KICKSTARTER LEVER
1. Install:
• Kickstarter lever “1”
•
Washer “2”
• Kickstarter lever bolt “3”
TIP
Install the kickstarter closest to but not contact-
ing the clutch cover mounting boss “a”.
Primary drive gear bolt
55 N·m (5.5 kgf·m, 41 lb·ft)
T
R
.
.
Kickstarter lever
30 N·m (3.0 kgf·m, 22 lb·ft)
T
R
.
.