4-42
CRANKCASE AND CRANKSHAFT
CRANKCASE AND CRANKSHAFT
REMOVING THE CRANKSHAFT
Order
Part name
Q'ty
Remarks
Engine
Refer to "ENGINE REMOVAL" section.
Piston
Refer to "CYLINDER HEAD, CYLINDER
AND PISTON" section.
Primary drive gear
Refer to "KICK SHAFT AND SHIFT SHAFT"
section.
Kick idle gear
Refer to "KICK SHAFT AND SHIFT SHAFT"
section.
Stopper lever
Refer to "KICK SHAFT AND SHIFT SHAFT"
section.
Rotor and stator
Refer to "CDI MAGNETO" section.
1
Segment
1
Refer to removal section.
2
Holder
2
3
Bolt (Neutral switch lead holder)
1
4
Bolt [L=50 mm (1.97 in)]
7
5
Bolt [L=60 mm (2.36 in)]
1
6
Bolt [L=70 mm (2.76 in)]
3
7
Holder
2
8
Crankcase (right)
1
Refer to removal section.
10 Nm (1.0 m kg, 7.2 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
30 Nm (3.0 m kg, 22 ft lb)
14 Nm (1.4 m kg, 10 ft lb)
10 Nm (1.0 m kg, 7.2 ft lb)
Summary of Contents for yz250 2015
