1
2
3
4
5
6
7
8
9
10
11
8-5
JW7
Engine Oil Replacement
1. Warm up the engine for several
minutes, place the utility vehicle
on a level surface, then stop the
engine.
Use caution not to touch hot
engine oil or hot engine parts,
during the following procedure.
Death or serious personal injury
can result from failing to comply
with warning instructions in this
manual.
2. Place an oil pan under the
engine drain plug.
3. Remove the oil drain plug and let
the oil drain completely.
Dispose of used oil in an
environmentally safe way, such as
taking oil to an oil collection station.
4. Install the drain plug, along with
a new drain plug gasket, finger-
tight before tightening to the
following torque:
Drain plug torque:
31 Nm, 3.1 m.kg
(23 ft.lb)
5. Add the correct quantity of oil
through the oil filler hole.
Recommended engine oil
classification: API Service SE, SF, or
SG. Engine oils labeled “Energy
Conserving II” are recommended.
TIP
TIP
Recommended oil:
YAMALUBE 4 cycle oil or
SAE 10W30
Engine oil capacity:
1.0 L, 1000 cc
(1.0 US qt)
Oil change quantity:
1.0 L, 1000 cc
(1.0 US qt)
Y-624
MAINTENANCE
LIT_19626_71_09.qxd:LIT_19626_16_05.qxd 1/20/09 3:43 PM Page 39
