4
Thank you for purchasing Yamaha’s YST-M5 Powered Speakers. Yamaha’s Active Servo Technology offers exceptional
high performance.
Cautions
Please read the following operating precautions before use:
•
Use the AC-DC adaptor designed specifically for the YST-M5
only. Yamaha cannot be held responsible for damage caused by
using other power supply adaptors.
•
When disconnecting the AC-DC adaptor from an AC receptacle,
hold and pull the plug, not the power cord.
•
If the YST-M5s are not going to be used for a while, disconnect the
AC-DC adaptor from the AC receptacle.
•
Always disconnect the AC-DC adaptor from the AC receptacle
before making any connections.
•
YST-M5s do not contain any user serviceable parts. Refer all
servicing to your Yamaha dealer.
•
Do not expose the YST-M5s to temperature extremes, direct
sunlight, excessive dust, humidity, or vibration.
•
Site the YST-M5s on a level, stable surface. Do not drop the
YST-M5s, apply excessive force to their controls, or put heavy
items on top of them.
•
If the YST-M5s should require cleaning, use a soft cloth. If
necessary, a damp cloth.
•
Do not obstruct the port with your hand or a foreign object.
•
To protect the YST-M5 speakers, avoid microphone feedback,
continuous and excessive output from electronic musical instru-
ments, excessive signal distortion.
•
If the YST-M5s are sited close to fluorescent or neon type lights, a
slight hum may be heard. In this case, relocate the YST-M5s away
from the light.
•
Although the YST-M5 speakers are magnetically shielded, keep
floppy disks and tapes away from them.
•
The YST-M5s may cause picture distortion when sited close to a
television or computer monitor. In this case, move them away a little.
CAUTION
The apparatus is not disconnected from the AC power source as long as
it is connected to the wall outlet, even if the apparatus itself is turned off.
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied
with this appliance, it should be cut off and an appropriate 3 pin plug
fitted. For details, refer to the instructions described below.
Note: The plug severed from the mains lead must be destroyed, as a plug
with bared flexible cord is hazardous if engaged in a live socket outlet.
SPECIAL INSTRUCTIONS FOR U.K. MODEL
IMPORTANT:
The wire in the mains lead are coloured in accordance with the
following code:
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the termi-
nals in your plug. Proceed as follows: the wire which is coloured
BLUE must be connected to the terminal which is marked with
the letter N or coloured BLACK. The wire which is coloured
BROWN must be connected to the terminal which is marked with
the letter L or coloured RED. Making sure that neither core is
connected to the earth terminal of the three pin plug.
CAUTION (FOR CANADA MODEL): TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND
FULLY INSERT.
Summary of Contents for YST-M5
Page 6: ......
