background image

68 

En

MANUAL SETUP

DD/DTS Dynamic Range 
(Dynamic range of Dolby Digital and 
DTS signals)

Use to select the amount of dynamic range compression. 
This setting is effective only when the unit is decoding 
Dolby Digital and DTS signals. Dynamic range is the 
difference between the smallest sound that can be heard 
above the noise of the equipment and the biggest sound 
that can be heard without distortion.
Choices: MIN (minimum), STD (standard), 

MAX 

(maximum)

Select to adjust the dynamic range compression.
• Select MIN for listening to sources at low volume 

levels.

• Select STD for general use.
• Select MAX for feature films.

Use to manually adjust various parameters related to the 
audio and video input.
SET MENU 

 MANUAL SETUP 

 INPUT MENU

INPUT ASSIGNMENT (Input assignment)

Use to assign the input jacks of this unit to other 
components if the initial settings of this unit do not 
correspond to your needs. By assigning other components 
to the input jacks on this unit, you can display the name of 
the connected component in the front panel display and 
OSD, and operate the component with the input selector 
button of the same name. If you connect a component to 
the input jacks of this unit and do not assign it, the default 
component name for that input jack is displayed in the 
front panel and OSD when selected.
• Select OPTICAL IN (1) to assign components to the 

TV OPTICAL IN jack of this unit.
Choices: 

TV

, VCR

• Select OPTICAL IN (2) to assign components to the 

AUX OPTICAL DIGITAL IN jack of this unit.
Choices: 

AUX

, DVD

• Select COAXIAL IN (3) to assign components to the 

COAXIAL DIGITAL IN jack of this unit.
Choices: 

DVD

, AUX

MIN

STD

MAX

[ ]/[ ]:Select
[ENTER]:Return

p

p

F)DD/DTS Dynamic Range

p

INPUT MENU

A)INPUT

ASSIGNMENT

B)INPUT

MODE

C)INPUT

TRIM

D)INPUT

RENAME

[ ]/[ ]:Up/Down

[ENTER]:Enter

3 INPUT MENU

.

p

p

OPTICAL IN

(1)

;;;;;

TV

(

TV

)

(2)

;;;;;

AUX

(

AUX

)

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

A)INPUT ASSIGNMENT 1/4

p

p

.

p

p

COAXIAL IN

(3)

;;;;;

DVD

(

DVD

)

[ ]/[ ]:Up/Down [ ]/[ ]:Sel

[ENTER]:Return

A)INPUT ASSIGNMENT 2/4

p

p

.

p

p

Summary of Contents for YSP1100BL





































































































Reviews: