Yamaha YSP-5600BMK2 Owner'S Manual Download Page 74

Page: 74 / 110

SETTINGS

➤

Setup menu

Sound

Adjust the volume of each channel to balance output levels. Use test sounds output
from each channel to adjust volume for optimal balance.

Settings

Front L, Front R, Center, Surround L, Surround R, Height L, Height R, Subwoofer

Adjustable range

-20 to +20

• When “My Surround” of “Channel Out” is set to “On” the following items can be configured (p. 73).

– Center

– Surround L/R

– Subwoofer

Adjust this unit’s volume and dynamic range for optimal balance. When “On” is
selected, dynamic range is adjusted as follows for optimal listening at low volumes,
such as might be used at night.

When the volume level is low:

Narrow the dynamic range. Loud sound is played back softer, and soft sound which is
hard to be listened to is played back louder.

When the volume level is high:

Widen the dynamic range. For both soft and loud sounds, source sound is played back
without adjusting volume.

Settings

• When set to “On”, “Dynamic Range” is automatically set to “Max”.

Channel Level

Setup Menu

➜

Sound

➜

Channel Level

Adaptive DRC

Setup Menu

➜

Sound

➜

Adaptive DRC

Off

The dynamic range is not adjusted automatically.

On (default)

Adjust the dynamic range automatically.

tpu

t lev

Out

put

level

Off

Input level

Volume: low

Volume: high

Summary of Contents for YSP-5600BMK2















































































































Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands

Yamaha YSP-5600BMK2, Owner'S Manual

Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands