SETTINGS
➤
Setup menu
En
69
Beam
When “AUTO SETUP” in the “IntelliBeam” menu (p. 30) is used, recommended beam settings are automatically applied by this unit. However, “Horizontal Angle”, “Vertical Angle”,
“Beam Travel Length”, “Focal Length” (except “Center”), and “Image Location” settings can later be fine-tuned.
The output method for each channel can also be specified in “Beam” menu.
• When manually adjusting sound beams for the front channels, set “Front” for “Channel Out” to “Beam”. Adjustment is not possible if “Front” is set to “Stereo”.
Adjust the horizontal angle of sound beams for each channel using test tones.
Adjust toward L (left) to move the direction of the output to the left and adjust toward R
(right) to move it to the right.
Settings
Front L, Front R, Center, Surround L, Surround R
Adjustable range
L90° to R90°
Adjust the vertical angle of sound beams for each channel using test tones.
Adjust upward to move output direction up, and adjust downward to move output
direction down.
Horizontal Angle
Setup Menu
➜
Beam
➜
Horizontal Angle
Beam angle
Angle to
left
Angle to
right
Left
W
key:
Increase angle.
X
key:
Decrease angle.
Right
X
key:
Increase angle.
W
key:
Decrease angle.
Vertical Angle
Setup Menu
➜
Beam
➜
Vertical Angle
S
Upward
T
Downward
Settings
Front L, Front R, Center, Surround L,
Surround R
Adjustable range
-45° to +45° (default: 0° (horizontal))
S
Upward
T
Downward
Settings
Height L, Height R
Adjustable range
+30° to +90°
