background image

NETWORKS

Playing back music with AirPlay

En

63

The AirPlay function allows you to play back iTunes or iPod music on the unit via 
network.

• This section describes “iPod touch”, “iPhone” and “iPad” as the “iPod”. “iPod” refers to “iPod touch”, 

“iPhone” and “iPad”, unless otherwise specified.

• To use this function, the unit and your PC or iPod must be connected to the same router (p. 50). You can 

check whether the network parameters (such as the IP address) are properly assigned to the unit in 
“Information” (p. 78) in the setup menu.

• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to 

connect. Connect the unit and iPod to the same SSID.

• The AirPlay function can be used with an iPhone, iPad, or iPod touch running iOS 4.3.3 or later, a Mac 

running OS X version 10.8 “Mountain Lion” or later, or a Windows computer with iTunes 10.2.2 or later 
installed.

Playback of iTunes/iPod music contents

Follow the procedure below to play back iTunes/iPod music contents on the unit.

1

Turn on the unit, and start iTunes on the PC or display the playback 
screen on the iPod.

If the iTunes/iPod recognizes the unit, the AirPlay icon (

) appears.

• If the icon does not appear, check whether the unit and PC/iPod are connected to the router properly.

2

On the iTunes/iPod, click (tap) the AirPlay icon and select the unit 
(network name of the unit) as the audio output device.

Playing back music with AirPlay

The unit

iTunes

iPod

Router

(wired or 
wireless)

(wired or 
wireless)

iTunes (example)

iPod iOS7/iOS8 (example)

iPod iOS6 (example)

YSP-5600 XXXX

YSP-5600 XXXX

iTunes (example)

iPod (example)

Network name of the unit

Summary of Contents for YSP-5600BMK2















































































































Reviews: