Yamaha YSP-5600BMK2 Page 45 Owner'S Manual Download

Page: 45 / 110

PLAYBACK

➤

Wireless playback of audio via Bluetooth connection

The unit can be used to receive and play audio from a

Bluetooth

device, and to transmit

audio for playback on a

Bluetooth

device.

See documentation supplied with your

Bluetooth

device for more information.

❑

Receiving audio from a

Bluetooth

device

Audio from a

Bluetooth

device, such as a mobile device or a digital music player, can

be played over a wireless connection.

❑

Transmitting audio to a

Bluetooth

device

Use

Bluetooth

wireless headphones and the like to listen to audio.

• Audio cannot be received by the unit from mobile devices and the like, and transmitted to speakers or

headphones at the same time.

• “Bluetooth” in the setup menu must be set to “On” (default; p. 82) to use

Bluetooth

functions.

• A

Bluetooth

device that has been assigned a passkey (PIN) other than “0000” cannot be connected to the

unit.

• The unit can connect to up to 20

Bluetooth

devices for receiving and transmitting audio. If a new device is

successfully connected to the unit after 20 other devices have already been connected, the device
information with the earliest connection date (the first device connected) will be erased to make room for
the new device.

• Be sure that the

Bluetooth

device is no farther than 10 m (33 ft.) from the unit when connecting the two.

• Refer to “Bluetooth” (p. 94) in “T roubleshooting” if a

Bluetooth

connection cannot be established.

• Adjust

Bluetooth

device volume as needed.

Wireless playback of audio via

Bluetooth

connection

Bluetooth

device (such as a

mobile device)

The unit

Bluetooth

speakers/

headphones

Summary of Contents for YSP-5600BMK2















































































































Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands

Yamaha YSP-5600BMK2, Owner'S Manual

Search results

Summary of Contents for YSP-5600BMK2

Reviews:

Related manuals for YSP-5600BMK2

Brands by name

Popular brands