PLAYBACK
➤
Enjoying sound based on your preference
En
40
2-channel playback (stereo playback mode)
2-channel stereo playback using the right front and left front
channels is enabled. When multi-channel audio signals are input,
they are down-mixed to 2 channels.
1
Press the STEREO key to switch to stereo playback
mode.
Delivering sound to a specified location
(target playback mode)
Target playback mode outputs sound beams from a single channel
for optimal listening from a specific position.
Refer to the illustrations below.
Play an input source, and adjust the beam angle.
1
Press the TARGET key.
2
Use the
W
/
X
key to adjust beam angle.
The angle to the left increases by 2 degrees each time the
W
key is pressed; the angle to the right increases by 2
degrees each time the
X
key is pressed.
A maximum angle of 90 degrees in either direction is
possible.
Disabling target playback mode
Press the 3D SURROUND key, SURROUND key, or STEREO key to
turn target playback mode off.
• The CINEMA DSP programs are not enabled in target playback mode.
• Bass output is controlled to prevent sounds from spreading in other directions.
For listening at low volumes, such as at night
For clear sound at a distance
T A R G E T L 1 6
Beam angle adjusted 16 degrees to the left
/
3
D
S
URROUND
S
URROUND
S
TEREO
TARGET
