background image

SETTINGS

Setup menu

En

80

Network

Configures the network settings.

Display the network information on the unit.

• The options displayed vary according to the type of network connection (Wired/Wireless (Wi-Fi)/Wireless 

Direct).

Select the network connection method.

Settings

Information

Setup Menu

Network

Information

Status

The connection status of the NETWORK jack

Connection

Connection method

MC Network

The connection status of MusicCast Network

SSID

The access point to which the unit is connected

Security

The encryption method for your network

MAC Address

MAC address (Ethernet/Wi-Fi)

IP Address

IP address

Subnet Mask

Subnet mask

Default Gateway

The IP address of the default gateway

DNS Server (P)

The IP address of the primary DNS server

DNS Server (S)

The IP address of the secondary DNS server

vTuner ID

The ID of the Internet radio (vTuner)

Network Connection

Setup Menu

Network

Network Connection

Wired

Select this option when connecting the unit to a network with a network 
cable (not supplied).

Wireless (Wi-Fi)

Select this option when connecting the unit to a network via the wireless 
router (access point). 

Wireless Direct

Select this option when connecting a mobile device to the unit directly. 

Summary of Contents for YSP-5600

















































































































Reviews: