SETTINGS
➤
Setup menu
En
76
Adjust this unit’s dynamic range (difference between maximum and minimum volumes).
Settings
• “Adaptive DRC” is automatically set to “Off” when the settings other than “Max” is selected.
Configure the DTS decoder for use with input of DTS audio signals.
❑
Neural:X
Specify whether or not Neural:X is used to generate channels not present in input
sources.
Settings
• Neural:X is the DTS:X surround sound decoder.
❑
Dialog Control
Increase the volume of dialog to make listening easier.
Adjustable range
0 (default) to 6 (dB)
• This setting is effective only for playback of DTS:X input sources that support dialog control.
Dynamic Range
Setup Menu
➜
Sound
➜
Dynamic Range
Min/Auto
Min: Sets dynamic range at a level that supports comfortable listening at low
volumes.
Auto: Sets dynamic range in accordance with information received from input
signal.
Standard
The dynamic range recommended for regular home use.
Max (default)
Outputs sound without adjusting the dynamic range of the input signals.
DTS
Setup Menu
➜
Sound
➜
DTS
Disable
Neural:X will not be used.
Enable (default)
Neural:X will be used.
“Neural:X” and “Dialog Control” may be provided with a firmware update.
See our website for the latest information.
The following settings are available for the DTS decoder before “Neural:X”
and “Dialog Control” are provided with firmware update.
Configure the DTS Neo:6 decoder for use when DTS audio signals are input.
Settings
• The DTS Neo:6 decoder is disabled with stereo playback and target playback.
Neo:6 Cinema
(default)
Use the DTS Neo:6 decoder suitable for movies.
Neo:6 Music
Use the DTS Neo:6 decoder suitable for music.
