NETWORKS
➤
Playing back music stored on mobile devices
En
66
Use this function to play music stored on your mobile device over a network.
• To use this function, the unit and your PC or mobile device must be connected to the same router (p. 51).
You can check whether the network parameters (such as the IP address) are properly assigned to the unit
in “Information” (p. 79) in the setup menu.
• When using a multiple SSID router, access to the unit might be restricted depending on the SSID to
connect. Connect the unit and mobile device to the same SSID.
Using a mobile device to play songs
Use the MusicCast CONTROLLER app installed on your mobile device to operate
playback.
• Configure basic settings for the MusicCast CONTROLLER app before playing music.
• Refer to the supplied “MusicCast Setup Guide” for details.
Playing back music stored on mobile devices
The unit
Mobile device
Router
(wired or wireless)
Caution
• When you use mobile device controls to adjust volume, the volume may be unexpectedly loud. This
could result in damage to the unit or speakers. If the volume suddenly increases during playback, stop
playback on the mobile device immediately.
