background image

NETWORKS

Listening to Internet radio

En

62

You can listen to Internet radio stations from all over the world.

• To use this function, the unit must be connected to the Internet (p. 51). You can check whether the network parameters (such as the IP address) are properly assigned to the 

unit in “Information” (p. 79) in the setup menu.

• You may not be able to receive some Internet radio stations.

• The unit uses the vTuner Internet radio station database service. This service may be discontinued without notice.

Playback of Internet radio

Use the MusicCast CONTROLLER app installed on your mobile 
device to select an Internet radio station. 

• Configure basic settings for the MusicCast CONTROLLER app before selecting 

an Internet radio station.

• Refer to the supplied “MusicCast Setup Guide” for details.

Registering favorite Internet radio stations

Assign Internet radio stations to the NET RADIO keys on the remote 
control, or save them in the vTuner Bookmarks folder.

1

Select the desired Internet radio station.

2

Press and hold one of the NET RADIO keys (1–3) for 
at least 3 seconds.

Tuning into assigned Internet radio stations

1

Press the NET RADIO key (1–3) to which the desired 
Internet radio station has been assigned.

“NET RADIO” is shown in the front panel display, and 
streaming begins.

Listening to Internet radio

Assigning a station to a NET RADIO key

NET RADIO
1-

3

Summary of Contents for YSP-5600

















































































































Reviews: