PLAYBACK
➤
Wireless playback of audio via Bluetooth connection
En
49
Listening to audio through
Bluetooth
speakers or headphones (transmitting)
• Music input using AirPlay cannot be output to
Bluetooth
devices.
1
Turn on the
Bluetooth
device.
2
Select the input source (other than
Bluetooth
) with
the input selector keys.
• If a
Bluetooth
device has been connected before, the unit will connect to the
last connected device when the input source is selected in step 2. Terminate
this connection to connect a new device.
3
Press the SETUP (
) key twice.
The setup menu is displayed on the TV screen.
4
Use the
S
/
T
keys to select “Bluetooth”, and then
press the ENTER key.
5
Use the
S
/
T
keys to select “Transmission”, and
then press the ENTER key.
6
Use the
S
/
T
keys to select “On”, and then press
the ENTER key.
7
Use the
S
/
T
keys to select “Device Search”, and
then press the ENTER key.
8
Use the
S
/
T
keys to select a
Bluetooth
device, and
then press the ENTER key.
The
indicator in the front panel display flashes while the
unit and
Bluetooth
device are being connected, and glows
steadily when the connection is established.
“Completed” is shown in the front panel display.
9
Play an audio source, and enjoy music via the
Bluetooth
device.
• “Not found” is displayed on the screen with step 8 if the unit was unable to find a
device to which to connect.
• “No Device Name” replaces the device name on the screen with step 8 if the unit
is unable to recognize the name of the device.
• Audio will also be output from the unit.
Bluetooth
connection is terminated in the following cases.
The
indicator on the unit’s front panel turns off when the
connection is terminated.
• The connection is terminated from the
Bluetooth
device, or
the
Bluetooth
device is turned off.
• “Transmission” in the setup menu is set to “Off”.
• The unit is turned off.
▲
A B C D E 1
F G H I J 2
a b c d e 3
f g h i j 4
▼
[ E N T E R ] : C o n f i r m
[ R E T U R N ] : C a n c e l
D e v i c e S e a r c h
Terminating
Bluetooth
connection
Flashes while
processing a
connection
Glows when the
connection is
established
/
ENTER
S
ETUP ( )
Input selector
keys
