PREPARATIONS
➤
d
Other connections
En
25
Connecting a subwoofer
A subwoofer can be connected to the unit for use with the unit. There are two ways to
connect a subwoofer to the unit: use a third-party RCA monaural cable, or use the
wireless subwoofer kit SWK-W16 to connect via a wireless connection.
Use a third-party RCA monaural cable to connect the subwoofer to the unit via the
monaural input jack on the subwoofer and the SUBWOOFER OUT jack on the unit.
When connecting a Yamaha subwoofer equipped with a system connector, connect a
system control cable (or third-party 3.5mm monaural mini plug cable) to the SYSTEM
CONNECTOR on the unit. This connection is required to turn the unit and subwoofer on
and off at the same time.
When the unit is connected to the subwoofer via the cable, set the subwoofer output to
“Wired” in the setup menu (p. 74)
• See documentation supplied with the subwoofer for more information.
The wireless subwoofer kit SWK-W16 enables wireless connection of a subwoofer to the
unit.
❑
Installing the SWK-W16
Install the SWK-W16 on or near the subwoofer. If subwoofer vibrations cause the
SWK-W16 to move when installed on the subwoofer, install it elsewhere or fix it in place
so that it does not move.
d
Other connections
Connecting a subwoofer via cable
AUX2
TV
OPTICAL
IN 1
(HDCP2.2)
IN 2
IN 3
IN 4
OUT
(ARC)
HDMI
IR-IN
IR-OUT
UPDATE ONLY
RS-232C
NETWORK
R
L
AUX1
SYSTEM
CONNCETOR
SUBWOOFER
OUT
SYSTEM
CONNECTOR
SUBWOOFER
OUT
INPUT
SYSTEM
CONNECTOR
The unit (rear)
Subwoofer
Using the wireless subwoofer kit SWK-W16
Subwoofer
SWK-W16
1 2 3 4 5 6
