USING THIS MANUAL
4
En
• This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the
supplied owner’s manual for the component.
• Some operations can be performed by using either the buttons on the main unit or on the remote control. In such cases, the operation is
described using remote control operation.
•
y
indicates a tip for your operation.
• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In
case of differences between the manual and product, the product has priority.
1
Install this unit in your listening room.
See “INSTALLATION” on page 11.
2
Connect this unit to your TV and other external components.
3
Prepare the remote control and turn on the power of this unit.
See “GETTING STARTED” on page 24.
4
Run AUTO SETUP.
See “AUTO SETUP (IntelliBeam)” on page 29.
5
Play back a source.
6
Change the beam modes and/or CINEMA DSP settings.
See “ENJOYING SURROUND SOUND” on page 42.
7
Run MANUAL SETUP to fine-tune settings and/or set remote control codes.
See “MANUAL SETUP” on page 60 and “REMOTE CONTROL FEATURES” on page 81.
USING THIS MANUAL
Notes
If you want to make additional settings
and adjustments
