4-9
Operation
Stopping clearing snow
1.
Release the drive clutch lever. The auger rotation
stops, and the Snowblower stops moving.
2.
Move the shift lever to the “N” (Neutral) position.
3.
Hold the drive clutch lever and pull back the auger
clutch lever to clear the snow on the auger and
impeller.
TIP
After clearing snow, hold the drive clutch lever and pull
back the auger clutch lever to clear the snow on the
auger and impeller. Leaving snow on the auger and
impeller could cause freeze and damage.
4.
Release the drive clutch lever. The auger clutch
lever automatically returns to its original position.
5.
Move the throttle lever to the “SLOW
” position.
Turn the engine switch key to the “STOP ” posi-
tion to stop the engine, and then turn the fuel cock
lever to the “STOP” position.
1
1. Drive clutch lever
1
2
1. Shift lever
2. “N” (Neutral)
1
2
1. Drive clutch lever
2. Auger clutch lever
2
1
3
1. Throttle lever
2. “FAST (START)
”
3. “SLOW
”
7XE-28199-U6-E0.book 9 ページ ２０２０年５月１日 金曜日 午後３時４３分
