Yamaha YS1070T Owner'S Manual Download

Page: 24 / 84

2-8

Controls and features

Push the chute deflector control lever
The chute deflector moves downward to blow snow
nearby.

Drive clutch lever

Used to make the Snowblower travel.

Hold the drive clutch lever
The Snowblower travels.
Release the drive clutch lever
The Snowblower stops traveling.

Turning switch

Used to change the direction.

R
Used to turn right.
L
Used to turn left.

Auger clutch lever

Used to rotate the auger.

Pull the auger clutch lever
The auger rotates.

TIP

It is impossible to pull the auger clutch lever if the drive
clutch lever is released.

Push the auger clutch lever
The auger stops rotating.

Do not press the chute deflector control lever
forcefully. Doing so may damage the chute deflec-
tor system.

NOTICE

1. Drive clutch lever

1. Turning switch

1. Auger clutch lever

7XE-28199-U6-E0.book 8 ページ２０２０年５月１日　金曜日　午後３時４３分

Summary of Contents for YS1070T





















































































Search results

Summary of Contents for YS1070T

Reviews:

Related manuals for YS1070T

Brands by name

Popular brands

Yamaha YS1070T, Owner'S Manual

Search results

Summary of Contents for YS1070T

Reviews:

Related manuals for YS1070T

Brands by name

Popular brands