Setting the use of surround speakers and their size
Selects the setting according to the use and size of your surround speakers.
Setup menu
“Speaker” > “Configuration” > “Surround”
Settings
Small
Select this option for small speakers.
The subwoofer or front speakers will produce surround channel low-
frequency components (configurable in “Crossover”).
Large
Select this option for large speakers.
The surround speakers will produce all of the surround channel frequency
components.
None
Select this option when no surround speakers are connected.
The front speakers will produce surround channel audio. Virtual CINEMA
DSP works in this case.
NOTE
▪ When configuring the speaker size, as a general guideline, select “Large” if the woofer diameter of your
speaker is 16 cm (6.1/4”) or larger, or “Small” if it is smaller than 16 cm (6.1/4”).
▪ For details on Virtual CINEMA DSP, see the following:
– “Enjoying sound field effects without surround speakers (Virtual CINEMA DSP)” (p.39)
Setting the crossover frequency of the low-frequency
components
Sets the lower limit of the low-frequency components that can be output from a
speaker whose size is set to “Small”. A frequency sound lower than the specified value
will be produced from the subwoofer or front speakers.
Setup menu
“Speaker” > “Configuration” > “Crossover”
Settings
40 Hz, 60 Hz, 80 Hz, 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz
NOTE
If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and
crossover frequency to maximum.
En
95
