Yamaha YHT-5950U, Owner'S Manual

Page: 118 / 159

Changing the speaker impedance setting (SP IMP.)
(U.S.A. and Canada models only)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
SP IMP.••8¬MIN
Change the unit’s speaker impedance settings depending on the impedance of the
speakers connected.
ADVANCED SETUP menu
“SP IMP.”
Settings
6
Ω
MIN Select this option when you connect 6-ohm speakers to the unit.
8
Ω
MIN Select this option when you connect 8-ohm or higher speakers to the unit.
Selecting the remote control ID (REMOTE ID)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
REMOTE ID••ID1
Change the unit’s remote control ID so that it matches the remote control’s ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with
a unique remote control ID for its corresponding receiver.
ADVANCED SETUP menu
“REMOTE ID”
Settings
ID1, ID2
Changing the remote control ID of the remote control
• To select ID1, while holding down the left cursor key, hold down SCENE (BD/DVD)
for 5 seconds.
• To select ID2, while holding down the left cursor key, hold down SCENE (TV) for 5
seconds.
Changing the FM/AM tuning frequency setting (TU)
(Asia, Taiwan, Brazil, General, and Central and South America models only)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
TU••••FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
ADVANCED SETUP menu
“TU”
Settings
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps
and AM by 10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps
and AM by 9-kHz steps.
Switching the video signal type (TV FORMAT)
ENHANCER
LINK
ECO
MASTER
OUT 2 -R es Hi YPAO VOL. A - DRC
SLEEP
STEREO
PARTY
TUNED ZONE
3 B 2 A
VOL.
FPR
SL SW SR
SBL SB SBR
FPL
MUTE VIRTUAL
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
ADVANCED SETUP menu
“TV FORMAT”
Settings
NTSC, PAL
En
118