manualshive.com logo in svg

Yamaha YFZ50 2019, Owner'S Manual, Page: 97 / 126

Share
Download
Yamaha YFZ50 2019 Owner'S Manual Download Page 97

8-22

8

EBU33951

Adjusting the throttle lever free play

Periodically check the throttle lever free play and
adjust if necessary.

TIP

The engine idling speed must be checked and ad-
justed before adjusting the throttle lever free play.

 

1. Slide the rubber covers apart.
2. Loosen the locknut.
3. To increase the throttle lever free play, turn

the throttle lever free play adjusting nut in di-
rection (a). To decrease the throttle lever free
play, turn the adjusting nut in direction (b).

4. Tighten the locknut.
5. Slide the rubber covers to their original posi-

tions.

EBU24061

Valve clearance

The valve clearance changes with use, resulting in
improper air-fuel mixture and/or engine noise. To
prevent this from occurring, the valve clearance
must be adjusted by a Yamaha dealer at the inter-
vals specified in the periodic maintenance and lu-
brication chart.

EBU29602

Brakes

Replacement of brake components requires pro-
fessional knowledge. Brake service should be
performed by a Yamaha dealer.

1. Rubber cover
2. Throttle lever free play adjusting nut
3. Locknut
4. Throttle lever free play

Throttle lever free play:

2.0–3.2 mm (0.08–0.13 in)

1

2 3

1

4

(a)

(b)

UBW463E0.book  Page 22  Monday, January 28, 2019  10:22 AM

Summary of Contents for YFZ50 2019































































































































Reviews:

No comments