manualshive.com logo in svg

Yamaha YFZ450RF, Owner'S Manual

The Yamaha YFZ450RF Owner's Manual is available for free download on our website. This comprehensive manual provides detailed instructions and information on operating and maintaining the Yamaha YFZ450RF. Visit manualshive.com to easily access and download the manual to enhance your ownership experience.

Share
Download
background image

4-8

4

WARNING

EWB00221

Always set the parking brake before starting
the engine. The ATV could start moving un-
expectedly if the parking brake is not ap-
plied. This could cause loss of control or a
collision.

Always be sure you have released the park-
ing brake before you begin to ride. The brake
could overheat if you ride the ATV without re-
leasing the parking brake. You could lose
braking performance which could cause an
accident. You could also wear out the brakes
prematurely.

 

EBU18531

Shift pedal

This ATV is equipped with a constant-mesh 5-
speed transmission. The shift pedal is located on
the left side of the engine and is used in combina-
tion with the clutch when shifting.

EBU18721

Fuel tank cap

Remove the fuel tank cap by turning it counter-
clockwise.

1. Shift pedal

1

U1TD61E0.book  Page 8  Tuesday, July 8, 2014  11:30 AM

Summary of Contents for YFZ450RF



























































































































































Reviews:

No comments

Related manuals for YFZ450RF

Brands by name

Popular brands

Load more brands