6-2
6
TIP
If the engine fails to start, release the start switch,
then push it again. Pause a few seconds before
the next attempt. Each cranking should be as
short as possible to preserve battery energy. Do
not crank the engine more than 10 seconds on
each attempt.
NOTICE
ECB00164
For maximum engine life, never accelerate
hard when the engine is cold!
EBU20525
Shifting
This ATV has a 5-speed forward transmission. The
transmission allows you to control the amount of
power you have available at a given speed or for
starting, accelerating, climbing hills, etc.
To shift into neutral, release the throttle lever, ap-
ply the clutch, and then repeatedly depress the
shift pedal until it stops.
When it stops, it will be in first gear. Raise the ped-
al slightly to reach the neutral position, and then
release the clutch.
EBU20595
To start out and accelerate
1. Release the throttle lever, apply the front or
rear brake, and then release the parking
brake.
2. Pull the clutch lever to disengage the clutch.
3. Shift into first gear, and then release the
brake.
NOTICE:
Always close the throttle
before shifting gears, otherwise damage
to the engine and drive train may result.
[ECB01220]
1. Shift pedal
2. Neutral position
1
1
N
2
3
4
5
2
UBW261E0.book Page 2 Friday, May 26, 2017 9:38 AM
Summary of Contents for YFZ450R 2017
Page 48: ...4 24 4 1 Handlebar 1 UBW261E0 book Page 24 Friday May 26 2017 9 38 AM ...
Page 63: ...7 1 7 EBU21142 RIDING YOUR ATV UBW261E0 book Page 1 Friday May 26 2017 9 38 AM ...
Page 146: ...11 2 11 1 Model label 1 UBW261E0 book Page 2 Friday May 26 2017 9 38 AM ...
Page 149: ...UBW261E0 book Page 3 Friday May 26 2017 9 38 AM ...