manualshive.com logo in svg

Yamaha YFM90RYXJ, Owner'S Manual

Share
Download
Yamaha YFM90RYXJ Owner'S Manual Download Page 111

8-28

8

2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive chain with a

special O-ring chain lubricant. 

NOTICE:

 Do

not use engine oil or any other lubricants
for the drive chain, as they may contain
substances that could damage the O-
rings.

 [ECB00582]

EBU24905

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-

essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.

WARNING

EWB02582

Inspect cables frequently and replace if
damaged. Corrosion can result when the ca-
ble sheaths become damaged, and cables
can also become frayed or kinked, which
could restrict the operation of controls and
lead to an accident or injury.

Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or
do not work smoothly, you could be unable
to control the ATV, which could lead to an
accident or collision.

 

1. O-ring

1

1

Recommended lubricant:

Yamaha cable lubricant or other suitable 
cable lubricant

UBD362E0.book  Page 28  Tuesday, January 31, 2017  5:10 PM

Summary of Contents for YFM90RYXJ





































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands