Yamaha YFM90 2019, Owner'S Manual

Page: 48 / 126

6-1
6
EBU19882
OPERATION
EBU19902
Read the Owner’s Manual carefully before riding
the ATV. If there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
EWB00632
Read the Owner’s Manual carefully to become
familiar with all controls in order to help pre-
vent any loss of control, which could cause an
accident or injury.
EBU33822
Starting a cold engine
NOTICE
ECB00151
See the “Engine break-in” section on page 6-4
prior to operating the engine for the first time.
1. Set the parking brake. (The engine can be
started only when the rear brake lever is ap-
plied.)
2. Turn the fuel cock to “ON”.
3. Turn the key to “ON” and set the engine stop
switch to “ ”.
4. Shift the drive select lever into the neutral po-
sition. (The neutral indicator light should
come on.)
5. Position the starter (choke) lever according to
the ambient temperature.
Position (1):
Cold engine start with ambient temperature
below 5 °C (40 °F).
Position (2):
Cold engine start with ambient temperature
between 0 °C (30 °F) and 30 °C (90 °F).
Position (3):
Cold engine start with ambient temperature
above 25 °C (80 °F).
UBD364E0.book Page 1 Monday, January 28, 2019 9:30 AM