4-8
4
leased slowly for smooth clutch operation. (See
page 6-1 for a description of the ignition circuit cut-
off system.)
EBU18421
Brake lever
The brake lever is located on the right handlebar.
To apply the front brake, pull the brake lever to-
ward the handlebar grip.
The brake lever is equipped with a position adjust-
ing bolt. To adjust the distance between the brake
lever and the handlebar grip, hold the brake lever
away from the handlebar so it does not contact the
adjusting bolt, loosen the locknut, turn the adjust-
ing bolt, and then tighten the locknut.
EBU18432
Brake pedal
The brake pedal is located on the right side of the
ATV. To apply the rear brake, push down on the
brake pedal.
1. Clutch lever
1. Brake lever
2. Locknut
3. Brake lever position adjusting bolt
4. Distance between brake lever and handlebar grip
U1AS61E0.book Page 8 Thursday, February 11, 2010 2:17 PM
Summary of Contents for YFM700RA
Page 17: ...1 7 1 For Oceania 4 5 2 3 1 1 U1AS61E0 book Page 7 Thursday February 11 2010 2 17 PM ...
Page 18: ...1 8 1 4AA 22259 40 2 1 U1AS61E0 book Page 8 Thursday February 11 2010 2 17 PM ...
Page 65: ...7 1 7 EBU21141 RIDING YOUR ATV U1AS61E0 book Page 1 Thursday February 11 2010 2 17 PM ...
Page 153: ...U1AS61E0 book Page 3 Thursday February 11 2010 2 17 PM ...