
8-24
8
15. Insert the air filter element into the air filter
case, and then tighten the wing bolt.
NOTICE:
Make sure that the air filter element is
properly seated in the air filter case. Never
operate the engine with the air filter ele-
ment removed. This will allow unfiltered air
to enter the engine, causing rapid engine
wear and possible engine damage. Addi-
tionally, operation without the air filter ele-
ment will affect the fuel injection system
with subsequent poor performance and
possible engine overheating.
[ECB00761]
16. Install the air filter case cover by hooking the
holders onto the air filter case.
17. Install the seat.
TIP
The air filter element should be cleaned every 20–
40 hours. It should be cleaned and lubricated more
often if the ATV is operated in extremely dusty ar-
eas. Each time the air filter element maintenance
is performed, check the air inlet of the air filter case
for obstructions. Check the air filter case rubber
joint to the throttle body and the rubber joint mani-
fold fittings for an air-tight seal. Tighten all fittings
securely to avoid the possibility of unfiltered air en-
tering the engine.
EBU27702
Cleaning the spark arrester
Select a well-ventilated area free of combustible
materials and make sure the exhaust and muffler
are cool.
1. Remove the bolt.
1. Washer
1
U1AS61E0.book Page 24 Thursday, February 11, 2010 2:17 PM
Summary of Contents for YFM700RA
Page 17: ...1 7 1 For Oceania 4 5 2 3 1 1 U1AS61E0 book Page 7 Thursday February 11 2010 2 17 PM ...
Page 18: ...1 8 1 4AA 22259 40 2 1 U1AS61E0 book Page 8 Thursday February 11 2010 2 17 PM ...
Page 65: ...7 1 7 EBU21141 RIDING YOUR ATV U1AS61E0 book Page 1 Thursday February 11 2010 2 17 PM ...
Page 153: ...U1AS61E0 book Page 3 Thursday February 11 2010 2 17 PM ...