Yamaha YFM66FGX, Owner'S Manual

Page: 80 / 180

7-19
7
TURNING YOUR ATV
To achieve maximum traction while riding off-road
in 2WD or 4WD, the two rear wheels turn together
at the same speed. Furthermore, when riding in
4WD-LOCK (“DIFF. LOCK”), the front wheels also
turn together at the same speed. Therefore, unless
the wheel on the inside of the turn is allowed to slip
or lose some traction, the ATV will resist turning. A
special turning technique must be used to allow
the ATV to make turns quickly and easily. It is es-
sential that this skill be learned first at low speed.
WARNING
EWB01310
As you approach a curve, slow down and begin to
turn the handlebars in the desired direction. As you
do so, put your weight on the footboard to the out-
side of the turn (opposite your desired direction)
and lean your upper body into the turn. Use the
throttle to maintain an even speed through the turn.
This maneuver will let the wheel on the inside of
the turn slip slightly, allowing the ATV to make the
turn properly.
POTENTIAL HAZARD
Turning improperly.
WHAT CAN HAPPEN
ATV could go out of control, causing a colli-
sion or overturn.
HOW TO AVOID THE HAZARD
Always follow proper procedures for turning
as described in this Owner’s Manual. Prac-
tice turning at low speeds before attempting
to turn at faster speeds. Do not turn at
speeds too fast for your skills or the condi-
tions. Operate at a slow speed and allow ex-
tra time and distance for maneuvers when in
4WD-LOCK (“DIFF. LOCK”).
U23D10E0.book Page 19 Wednesday, March 14, 2007 1:50 PM