manualshive.com logo in svg

Yamaha YFM45KDXK, Owner'S Manual, Page: 93 / 164

Share
Download
Yamaha YFM45KDXK Owner'S Manual Download Page 93

8-17

8

To install the panel

1. Connect the coupler, and then place the pan-

el in the original position.

2. Install the quick fasteners.
3. Place the carrier in the original position, and

then install the carrier bolts under the fenders.

4. Install the carrier top bolts, and then tighten

all bolts to the specified torques.

5. Install the cover.

For YFM45KPXK / YFM45KPLK /
YFM45KPHK: Install the handlebar-mount-
ed light cover.

For YFM45KDXK / YFM45KDHK: Install
the handlebar cover.

6. Install the panels.

EBU23215

Checking the spark plug

The spark plug is an important engine component,
which is easy to check. Since heat and deposits
will cause any spark plug to slowly erode, the
spark plug should be removed and checked in ac-
cordance with the periodic maintenance and lubri-
cation chart. In addition, the condition of the spark
plug can reveal the condition of the engine.

To remove the spark plug

1. Remove the spark plug cap.

Tightening torques:

Carrier bolt (top):

34 N·m (3.4 kgf·m, 25 lb·ft)

Carrier bolt (under fenders):

7 N·m (0.7 kgf·m, 5.2 lb·ft)

UBB511E0.book  Page 17  Monday, March 5, 2018  3:26 PM

Summary of Contents for YFM45KDXK





































































































































































Reviews:

No comments