manualshive.com logo in svg

Yamaha YFM45KDXK, Owner'S Manual, Page: 112 / 164

Share
Download
Yamaha YFM45KDXK Owner'S Manual Download Page 112

8-36

8

WARNING

EWB02342

Always let the exhaust system cool prior to
touching exhaust components.
Do not start the engine with the spark arrester
removed. Sparks or exhaust particulate can
cause eye injury, burns, or start a fire.

 

1. Remove the tailpipe bolts.
2. Remove the tailpipe by pulling it out of the

muffler, and then remove the gasket.

3. Tap the tailpipe lightly, and then use a wire

brush to remove any carbon deposits from
the spark arrester portion of the tailpipe and
inside of the tailpipe housing.

4. Check the gasket for damage. Replace if nec-

essary.

5. Install the gasket onto the tailpipe, then insert

the tailpipe into the muffler and align the bolt
holes.

6. Install the bolts and tighten to the specified

torque.

EBU23921

V-belt cooling duct check hose

If dust or water collects in the V-belt cooling duct
check hose, remove the hose and clean it.

1. Gasket
2. Spark arrester
3. Tailpipe
4. Tailpipe bolt

3

2

4

1

4

Tightening torque:

Tailpipe bolt:

10 N·m (1.0 kgf·m, 7.4 lb·ft)

UBB511E0.book  Page 36  Monday, March 5, 2018  3:26 PM

Summary of Contents for YFM45KDXK





































































































































































Reviews:

No comments