manualshive.com logo in svg

Yamaha YFM45FGX, Owner'S Manual

Share
Download
Yamaha YFM45FGX Owner'S Manual Download Page 79

7-17

7

TURNING YOUR ATV

To achieve maximum traction while riding off-road
in 2WD or 4WD, the two rear wheels turn together
at the same speed. Furthermore, when riding in
4WD-LOCK (“DIFF. LOCK”), the front wheels also
turn together at the same speed. Therefore, unless
the wheel on the inside of the turn is allowed to slip
or lose some traction, the ATV will resist turning. A
special turning technique must be used to allow
the ATV to make turns quickly and easily. It is es-
sential that this skill be learned first at low speed.

WARNING

EWB01310

POTENTIAL HAZARD
Turning improperly.
WHAT CAN HAPPEN
ATV could go out of control, causing a colli-
sion or overturn.

HOW TO AVOID THE HAZARD
Always follow proper procedures for turning
as described in this Owner’s Manual. Prac-
tice turning at low speeds before attempting
to turn at faster speeds. Do not turn at
speeds too fast for your skills or the condi-
tions. Operate at a slow speed and allow ex-
tra time and distance for maneuvers when in
4WD-LOCK (“DIFF. LOCK”).

U17S10E0.book  Page 17  Friday, July 6, 2007  1:37 PM

Summary of Contents for YFM45FGX























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands