Yamaha YFM45FGX, Owner'S Manual

Page: 26 / 182

4-7
4
switch to override the differential gear lock speed
limiting function. (See page 4-9.) Releasing the
switch restores the speed limiting function.
While the override switch is pushed, the segments
of the speedometer digits will appear as shown in
the figure.
NOTE:
If the digits of the speedometer appear as shown
when the switch is NOT being pushed, this could
indicate a malfunction in the electrical system. In
this case, take the ATV to a Yamaha dealer at the
first opportunity.
WARNING
EWB00110
EBU26633
On-Command four-wheel-drive switch
“2WD”/“4WD”
This ATV is equipped with a switch to change from
two-wheel drive to four-wheel drive and vice-versa.
Select the appropriate drive according to the ter-
rain and the conditions.
●
“2WD” (two-wheel drive): Power is supplied to
the rear wheels.
POTENTIAL HAZARD
Riding too fast while the ATV is in four-
wheel-drive differential gear lock.
WHAT CAN HAPPEN
All wheels turn at the same speed when the
differential is locked, so it takes more effort
to turn the ATV. The effort needed to turn in-
creases with the riding speed. You may lose
control and have an accident if you cannot
make a sharp enough turn for the speed you
are traveling.
HOW TO AVOID THE HAZARD
Always ride at a slow speed when the ATV is
in four-wheel-drive differential gear lock, and
allow extra time and distance for maneuvers.
U17S10E0.book Page 7 Friday, July 6, 2007 1:37 PM