Yamaha YFM45FGX, Owner'S Manual

Page: 23 / 182

4-4
4
EBU18031
Multifunction display
The speedometer unit is equipped with the follow-
ing:
●
a speedometer (which shows the riding speed)
●
an odometer (which shows the total distance
traveled)
●
two tripmeters (which show the distance trav-
eled since they were last set to zero)
● a clock
● an hour meter (which shows the total time the
key has been turned to “ON”)
Odometer and tripmeter modes
Pushing the “TRIP/ODO” button switches the dis-
play between the odometer mode “ODO” and the
tripmeter modes “A” and “B” in the following order:
ODO
→
TRIP A
→
TRIP B
→
ODO
To reset a tripmeter, select it by pushing the
“TRIP/ODO” button, and then push the
“TRIP/ODO” button for at least three seconds. The
tripmeters can be used to estimate the distance
that can be traveled with a full tank of fuel. This in-
formation will enable you to plan future fuel stops.
NOTE:
Holding in the “TRIP/ODO” button and then turning
the key to “ON” switches the display between
“mph” and “km/h”.
Clock mode
Pushing the “ ”/“ ” button switches the display
between the clock mode “CLOCK” and the hour
meter mode “HOUR” in the following order:
CLOCK
→
HOUR
→
CLOCK
1. Speedometer
2. “H” button
3. “M” button
4. Clock/Hour meter
5. Odometer/Tripmeter A/Tripmeter B
6. “TRIP/ODO” button
7. Clock/Hour “ ”/“ ” button
U17S10E0.book Page 4 Friday, July 6, 2007 1:37 PM