7-17
7
●
Never operate the ATV on hills too steep for
the ATV or for your abilities. The ATV can
overturn more easily on extremely steep hills
than on level surfaces or small hills.
●
Shift your weight backward and to the up
side of the hill.
●
Never go down a hill at high speed.
●
Avoid going down a hill at an angle that
would cause the ATV to lean sharply to one
side. Go straight down the hill where possi-
ble.
●
Improper braking can cause the wheels on
the uphill side to come off the ground or
cause loss of traction. Gradually apply only
the rear brake when going downhill.
When riding your ATV downhill, shift your weight
as far to the rear and uphill side of the ATV as pos-
sible. Move back on the seat and sit with your arms
straight. Choose a low gear which will allow the en-
gine compression to do most of the braking for you.
Use caution while descending a hill with loose or
slippery surfaces. Braking ability and traction may
be adversely affected by these surfaces. Improper
braking may also cause a loss of traction. Gradual-
ly apply only the rear brake.
Whenever possible, ride your ATV straight down-
hill. Avoid sharp angles which could allow the ATV
to tip or roll over. Carefully choose your path and
ride no faster than you will be able to react to ob-
stacles which may appear.
U1BS60E0.book Page 17 Thursday, April 16, 2009 4:11 PM
Summary of Contents for YFM350RZ
Page 12: ...1 2 1 4D3 2816L 20 43P 2816R 00 1 2 3 U1BS60E0 book Page 2 Thursday April 16 2009 4 11 PM ...
Page 17: ...1 7 1 For Oceania 1 2 3 4 5 U1BS60E0 book Page 7 Thursday April 16 2009 4 11 PM ...
Page 57: ...7 1 7 EBU21141 RIDING YOUR ATV U1BS60E0 book Page 1 Thursday April 16 2009 4 11 PM ...
Page 135: ...11 3 11 1 Model label U1BS60E0 book Page 3 Thursday April 16 2009 4 11 PM ...