manualshive.com logo in svg

Yamaha YFM09RYXG, Owner'S Manual

The Yamaha YFM09RYXG Owner's Manual is available for free download from our website. This comprehensive manual provides detailed instructions and information about operating and maintaining your Yamaha YFM09RYXG. Enhance your experience with this powerful product by downloading the manual today from manualshive.com.

Share
Download
background image

4-10

4

immediately. If gasoline spills on your skin,
wash with soap and water. If gasoline spills on
your clothing, change your clothes.

 

NOTICE

ECB00071

Use only unleaded gasoline. The use of leaded
gasoline will cause severe damage to internal
engine parts, such as the valves and piston
rings, as well as to the exhaust system.

 

Your Yamaha engine has been designed to use
regular unleaded gasoline with a research octane
number of 91 or higher (95 or higher for Europe). If
knocking (or pinging) occurs, use a gasoline of a
different brand. Use of unleaded fuel will extend
spark plug life and reduce maintenance costs.

EBU18821

Fuel cock

The fuel cock supplies fuel from the tank to the
carburetor while also filtering it.
The fuel cock lever positions are explained as fol-
lows and shown in the illustrations.

OFF

With the fuel cock lever in this position, fuel will not
flow. Always turn the fuel cock lever to this posi-
tion when the engine is not running.

1. Arrow mark positioned over “OFF”

1

UBD360E0.book  Page 10  Wednesday, February 25, 2015  2:41 PM

Summary of Contents for YFM09RYXG

































































































































Reviews:

No comments

Related manuals for YFM09RYXG

Brands by name

Popular brands

Load more brands