manualshive.com logo in svg

Yamaha YFM09RYXG, Owner'S Manual, Page: 107 / 128

Share
Download
Yamaha YFM09RYXG Owner'S Manual Download Page 107

8-28

8

1. Clean the drive chain with kerosene and a

small soft brush. 

NOTICE:

 To prevent dam-

aging the O-rings, do not clean the drive
chain with steam cleaners, high-pressure
washers or inappropriate solvents.

 [ECB00572]

2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive chain with a

special O-ring chain lubricant. 

NOTICE:

 Do

not use engine oil or any other lubricants
for the drive chain, as they may contain
substances that could damage the O-
rings.

 [ECB00582]

EBU24905

Checking and lubricating the cables

The operation and the condition of all control ca-
bles should be checked before each ride, and the
cables and cable ends should be lubricated if nec-
essary. If a cable is damaged or does not move
smoothly, have a Yamaha dealer check or replace
it.

WARNING

EWB02582

Inspect cables frequently and replace if
damaged. Corrosion can result when the ca-
ble sheaths become damaged, and cables
can also become frayed or kinked, which
could restrict the operation of controls and
lead to an accident or injury.

Always make sure all control cables work
smoothly before you begin riding in cold
weather. If the control cables are frozen or

1. O-ring

1

1

Recommended lubricant:

Yamaha cable lubricant or other suitable 
cable lubricant

UBD360E0.book  Page 28  Wednesday, February 25, 2015  2:41 PM

Summary of Contents for YFM09RYXG

































































































































Reviews:

No comments