9-34
9
EBU25248
Replacing the fuse
If an electrical problem is suspected, check the
fuse and replace it if necessary as follows.
NOTICE
ECB00641
To prevent accidental short-circuiting, turn off
the main switch when checking or replacing a
fuse.
1. Turn off all electrical systems. (See page 5-1.)
2. Remove the seat. (See page 5-13.)
3. Remove the blown fuse, and then install a
new fuse of the specified amperage.
WARNING! Always use a fuse of the spec-
ified rating, and never use a substitute ob-
ject in place of the proper fuse. An
improper fuse or a substitute object can
cause damage to the electrical system,
which could lead to a fire.
[EWB02173]
4. Turn on the main switch and start the engine.
5. Install the seat.
6. If the fuse immediately blows again, have a
Yamaha dealer check the vehicle.
EBU34030
Removing a wheel
1. Place the ATV on a level surface.
2. Loosen the wheel bolts.
1. Fuse
2. Spare fuse
1
2
Specified fuse:
7.5 A
UB8W12E0.book Page 34 Wednesday, January 22, 2020 2:13 PM
