ENGLISH
YDP-131/YDP-213
Selecting & Playing Voices
20
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression
to the sound to create a realistic acoustic ambience.
While holding down the
[PIANO/VOICE]
button, press one of the C2–E2 keys to select
a reverb type.
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G
4 keys while
holding down the
[PIANO/VOICE]
button. The depth range is from 0 through 20.
While holding down the
[PIANO/VOICE]
button, press the A4 key to set the reverb to
the depth most suitable for the selected voice.
Procedure
Key
Reverb Type
Description
C2
Room
This setting adds a continuous reverb effect to the sound, similar to
the acoustic reverberation you would hear in a room.
C
2
Hall1
For a “bigger” reverb sound, use the HALL 1 setting. This effect sim-
ulates the natural reverberation of a small-size concert hall.
D2
Hall2
For a truly spacious reverb sound, use the HALL 2 setting. This effect
simulates the natural reverberation of a large concert hall.
D
2
Stage
Simulates the reverb of a stage environment.
E2
Off
No effect is applied.
The lowest key
C
2 D
2
C2
E2
D2
The default reverb type (includ-
ing OFF) and depth settings are
different for each voice.
depth 0:
no effect
depth 20: maximum reverb
depth
The depth value increases as you press higher keys.
The lowest key
C3: depth 0
A4
G
4: depth 20
18
