Yamaha YC Series, Owner'S Manual

Page: 42 / 76

SETTINGS LIST
YC61 Owner’s Manual
42
From the [SETTINGS] button, you can configure and store the various settings of the currently selected Live Set Sound.
The settings made here will all be stored in the Live Set Sound.
Operation
1.
Press the [SETTINGS] button.
2.
Use the Encoder dial and the [ENTER] button to select an item and display the settings screen.
NOTE
If there are six or fewer items displayed on the screen, you can also use the LIVE SET buttons [1] to [6] to select the items directly. The
LIVE SET buttons [1] to [6] correspond to the items in order from the top. The lamps for selectable buttons light up.
3.
Use the Encoder dial to change and set the value or setting.
4.
Press the [ENTER] button to return to the Top screen (Live Set Sound).
Sound
SETTINGS LIST
Function name Description
Organ Settings Determines the detailed settings for the Organ Section.
Items marked with an asterisk (*) can be configured only when the VCM
Organ type (H1–H3) is selected. If at least one of the items marked with (*) is
changed from the default, a “+” will be displayed on the upper right of “H1”–
“H3” on the Top screen.
Leak Level* Adjusts the volume of the leakage sound (sound leaked from the tonewheel to
the electric circuit).
Settin g s:
0 – 127
Default: 64
KeyClick Level* Determines the volume of the key click sound produced when you press a key.
Settin g s:
0 – 127
Default: 64
Perc. Link to 1feet* Determines the operation of the [1'] (one foot) drawbar when switching the
PERCUSSION on or off.
•
On:
When PERCUSSION is turned on, the sound of the [1'] drawbar stops.
• Off: The [1'] drawbar generates sound regardless of whether PERCUSSION
is on or off.
Default:
On
Expression Type Determines the position in the organ’s signal path where the expression pedal
is applied.
•
Drive+Vol: The pedal effect is applied to the pre-amplifier in the Organ.
Operating the pedal changes both the volume and the distortion of the
Organ sound. If the VCM Organ type is selected, this faithfully reproduces
the effect of the expression pedal on a vintage organ.
• Volume: The pedal effect is applied directly before the REVERB Section
after the Organ sound is generated. Operating the pedal changes the volume,
but not the distortion, of the Organ sound.
Default:
Drive+Vol