manualshive.com logo in svg

Yamaha YBR 125K, Owner'S Manual, Page: 71 / 83

Share
Download
Yamaha YBR 125K Owner'S Manual Download Page 71

6-31

It is advisable to have a Yamaha dealer service the
wheel.
Securely support the motorcycle so there is no danger
of it falling over.

Front wheel removal

1. Place the motorcycle on the centerstand.
2. Loosen the front brake cable by loosening the adjusting

bolt.

3. Remove the speedometer cable by loosening the cable

clip.

4. With the help of ar appropriete tool completely loose

the axle nut and remove it.

1. Lock nut                        2. Clip

3. Axle nut

CAUTION:

6-31

It is advisable to have a Yamaha dealer service the
wheel.
Securely support the motorcycle so there is no danger
of it falling over.

Front wheel removal

1. Place the motorcycle on the centerstand.
2. Loosen the front brake cable by loosening the adjusting

bolt.

3. Remove the speedometer cable by loosening the cable

clip.

4. With the help of ar appropriete tool completely loose

the axle nut and remove it.

1. Lock nut                        2. Clip

3. Axle nut

CAUTION:

Summary of Contents for YBR 125K




















































































Reviews:

No comments