PREPARATION
➤
Turning on the unit
En
15
Turning on the unit
This section explains initial setup of the unit, performed when it is
turned on for the first time after purchase.
1
Press the
z
key to turn on the unit.
When the center unit is turned on, the center unit and
subwoofer are automatically connected via wireless
connection. Once the connection has been successfully
established, the STATUS indicator on the subwoofer glows as
shown in the illustration below, and the unit is ready for play
back.
NOTE
• If the STATUS indicator does not glow properly the first time the unit is
turned on, pair the center unit and subwoofer manually. See “Pairing the
center unit and subwoofer” (p. 62).
STATUS
STATUS
indicator
Glows green
Wired connection
If there is no sound coming from the subwoofer, or if sound is
intermittent, due to the influence of radio waves from other
devices, connecting the center unit and subwoofer via cables will
solve the problem. Connect the center unit and subwoofer via an
RCA mono cable (not supplied) and a 3.5 mm monaural mini
plug cable (not supplied). A 3.5 mm monaural mini plug cable is
required to turn the center unit and subwoofer on and off at the
same time.
To connect the center unit and subwoofer using a wired
connection, set “Bass Out” of “Subwoofer” in the setup menu to
“Wired” (p. 45).
When the center unit is turned on, the subwoofer turns on and its
STATUS indicator glows green.
NOTE
• Be sure the center unit is turned off before connecting the subwoofer.
• The subwoofer supplied with the unit can only be connected.
SYSTEM
CONNECTOR
SUBWOOFER
PAIRING
INPUT
STATUS
SYSTEM
CONNECTOR
SUBWOOFER
OUT
INPUT
SYSTEM
CONNECTOR
RCA mono cable
3.5 mm monaural mini
plug cable
z