CAMSHAFTS
5-19
EAS1TP1052
REMOVING THE CAMSHAFTS AND
ROCKER ARMS
1. Align:
• “I” mark on the front cylinder camshaft
sprocket
(with the arrow mark on the front cylinder
head)
▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼ ▼▼▼
▼
▼▼▼
Front cylinder
a. Turn the crankshaft counterclockwise.
b. When the front cylinder piston is at TDC on
the compression stroke, align the TDC mark
“a” on the generator rotor with the slot “b” in
the generator cover.
TIP
To position the front cylinder piston at TDC on
the compression stroke, align the “I” mark “c” on
the camshaft sprocket with the arrow mark “d”
on the front cylinder head.
▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲ ▲▲▲
▲
▲▲▲
2. Remove:
• Front cylinder timing chain tensioner “1”
3. Remove:
• Front cylinder camshaft sprocket
TIP
• While holding the camshaft sprocket with the
rotor holding tool “1”, loosen the camshaft
sprocket bolt “2”.
• To prevent the timing chain from falling into the
crankcase, fasten it with a wire.
4. Remove:
• Camshaft retainer
• Front cylinder camshaft
5. Remove:
• Intake rocker arm shaft
• Exhaust rocker arm shaft
• Intake rocker arm
• Exhaust rocker arm
TIP
Remove the rocker arm shafts with the slide
hammer bolt “1” and weight “2”.
b
a
Rotor holding tool
90890-01235
Universal magneto & rotor holder
YU-01235
Summary of Contents for XVS950CU 2014
