manualshive.com logo in svg

Yamaha XVS1300AW 2007, Owner'S Manual

Share
Download
Yamaha XVS1300AW 2007 Owner'S Manual Download Page 67

PERIODIC MAINTENANCE AND MINOR REPAIR

6-26

6

EAU23290

Checking the wheel bearings 

The front and rear wheel bearings must
be checked at the intervals specified in
the periodic maintenance and lubrica-
tion chart. If there is play in the wheel
hub or if the wheel does not turn
smoothly, have a Yamaha dealer check
the wheel bearings.

EAU23370

Battery 

This model is equipped with a sealed-
type (MF) battery, which does not re-
quire any maintenance. There is no
need to check the electrolyte or to add
distilled water.

CAUTION:

ECA10620

Never attempt to remove the battery
cell seals, as this would permanent-
ly damage the battery.

WARNING

EWA10760

●

Electrolyte is poisonous and
dangerous since it contains sul-
furic acid, which causes severe
burns. Avoid any contact with
skin, eyes or clothing and al-
ways shield your eyes when
working near batteries. In case
of contact, administer the fol-
lowing FIRST AID.

• EXTERNAL: Flush with plenty

of water.

• INTERNAL: Drink large quan-

tities of water or milk and im-
mediately call a physician.

• EYES: Flush with water for 15

minutes and seek prompt
medical attention.

●

Batteries produce explosive hy-
drogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and pro-
vide sufficient ventilation when
charging it in an enclosed
space.

1. Negative battery terminal

2. Positive battery terminal

3. Battery

U12C20E0.book  Page 26  Wednesday, October 18, 2006  3:54 PM

Summary of Contents for XVS1300AW 2007



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands