Instrument an
d
control functions
3-8
3
The clock uses a 12-hour time system.
TIP
When the main switch is turned off, the
clock can be viewed by pushing the
top set button.
To set the clock
1. Turn the key to “ON”.
2. Push the bottom set button and
top set button together until the
hour digits start flashing.
3. Push the bottom set button to set
the hours.
4. Push the top set button and the
minute digits will start flashing.
5. Push the bottom set button to set
the minutes.
6. Push the top set button to confirm
settings and start the clock.
TIP
When setting the hours and minutes,
push the bottom set button briefly to
increase the increment value one by
one, or push and hold the button to in-
crease the increment value continu-
ously.
OFF-ROAD In
d
icator
This indicator comes on when the ABS
has been manually disabled.
To switch off the ABS
1. Turn the key to “ON”.
2. The vehicle being stationary, push
the “OFF-ROAD ABS ON/OFF”
button until the “ABS OFF” warn-
ing light starts flashing, then re-
lease the button.
3. The “ABS OFF” warning light and
“OFF-ROAD” indicator will come
on simultaneously.
TIP
The ABS will be disabled until the key
is turned to “OFF”, or the engine stop
switch is turned to “
” (stop) when
the engine is running or you stop the
vehicle and push the “OFF-ROAD ABS
ON/OFF” button again. The “ABS
OFF” warning light and the “OFF-
ROAD” indicator will turn off.
WARNING
EWAM1050
Always ri
d
e on pave
d
roa
d
s with the
ABS turne
d
on. Ri
d
in
g
on pu
b
lic
roa
d
s with the ABS
d
isa
b
le
d
may
b
e
ille
g
al an
d
voi
d
your insurance. Turn
the ABS off only when ri
d
in
g
on non-
pave
d
surfaces.
Multi-function
d
isplay
The multi-function display can show:
an odometer
two tripmeters
a countdown tripmeter
a fuel reserve tripmeter
an instantaneous fuel consump-
tion display
an average fuel consumption dis-
play
a coolant temperature display
an air temperature display
a brightness control mode
1. Multi-function display
1
UBW3E0E0.book Page 8 Friday, May 24, 2019 11:01 AM
