Periodic maintenance and adjustment
7-33
1
2
3
4
5
6
7
8
9
10
11
12
EAU53906
Replacing the fuses
The main fuse and the fuse boxes,
which contain the fuses for the individu-
al circuits, are located behind panel C.
(See page 7-9.)
If a fuse is blown, replace it as follows.
1. Turn the main switch off and turn
off the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage.
WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15132]
3. Turn the main switch on and turn
on the electrical circuit in question
to check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1. Fuse box 1
2. Fuse box 2
3. Main fuse
4. Spare main fuse
3
4
2
1
1. Spare fuse
2. Ignition fuse
3. Fuel injection system fuse
4. Spare fuse
5. Headlight fuse
6. Signaling system fuse
1
2 3
4
5
6
Specified fuses:
Main fuse:
30.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Headlight fuse:
15.0 A
Fuel injection system fuse:
10.0 A
B1U-9-75-E0.book 33 ページ ２０２３年４月２０日 木曜日 午後１時５３分
