Yamaha XT1200Z(Z) 2010, Service Manual, Page: 35 / 616

FEATURES
1-26
TIP
The ABS warning light comes on or flashes if the vehicle is ridden with the test coupler adapter con-
nected to the ABS test coupler.
EAS23P1065
ABS WARNING LIGHT AND OPERATION
ABS warning light
• When the main switch is set to “ON”, the ABS warning light comes on for 2 seconds, then goes off.
• The ABS warning light comes on while the start switch is being pushed.
• If the ABS warning light comes on while riding, stop the vehicle, and then set the main switch to “OFF”,
then back to “ON”. The ABS operation is normal if the ABS warning light comes on for 2 seconds, then
goes off.
• If the rear wheel is raced with the vehicle on the centerstand, the ABS warning light may flash or come
on. If this occurs, set the main switch to “OFF”, then back to “ON”. The ABS operation is normal if the
ABS warning light goes off when the vehicle first starts off after the main switch was set back to “ON”.
• The ABS operation is normal if the ABS warning light flashes.
• If the ABS warning light comes on or flashes while riding, the ABS and UBS will not work correctly.
There may be little or no additional rear brake force provided by the UBS. If the UBS does not operate,
the front and rear brakes will operate independently according to the rider input. When the brake lever
is squeezed, only the front brakes will operate and when the brake pedal is depressed, only the rear
brake will operate.
1
3