Instrument and control functions
5-27
1
2
3
4
5
6
7
8
9
10
11
12
13
TIP
When turning the damping force
adjuster in direction (a), the 0 click
position and the 1 click position
may be the same.
When turning the damping force
adjuster in direction (b), it may click
beyond the stated specifications,
however such adjustments are in-
effective and may damage the
suspension.
EAU94912
Adjusting the shock absorber
assembly
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring and a rebound damping force
adjusting screw.
NOTICE
ECA10102
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Spring preload
1. Remove the side covers. (See
2. Turn the adjusting ring in direction
(a) to increase the spring preload.
Turn the adjusting ring in direction
(b) to decrease the spring preload.
Align the appropriate notch in the
adjusting ring with the position in-
dicator on the shock absorber.
1. Compression damping force adjusting bolt
(for fast compression damping)
Compression damping setting:
Minimum (soft):
11 click(s) in direction (b)
Standard:
6 click(s) in direction (b)
Maximum (hard):
1 click(s) in direction (b)
(b)
(a)
1
1
1
BEA-28199-11.book 27 ページ ２０２２年１０月１３日 木曜日 午後２時３０分
